Mollon, G. (2022). “Modélisation discrète des écoulements solides : géomécanique granulaire, troisièmes corps tribologiques, et glissements sismiques”, INSA Lyon HDR Thesis, 217p, in French.
PhD Thesis
Mollon, G. (2010). “Etude déterministe et probabiliste du comportement des tunnels”, INSA Lyon Phd Thesis, University of Lyon, 378p, in French.
Supervised and co-supervized PhD Thesis
Kounoudji, K. (2016). “Intimité tribologique des assemblages boulonnés par une approche modélisation et expérimentations : application aux assemblages des structures d’aéronefs”, INSA Lyon Phd Thesis, University of Lyon, in French.
Tsala-Moto, S. (2017). “Compatibilité tribologique d’un revêtement de surface avec une application donnée : Cas d’un revêtement de WS2 sur une tige de piston de frein aéronautique”, INSA Lyon Phd Thesis, University of Lyon, in French.
Jaza, R. (2020). “Prediction of the tribological behaviour of a contact with third body particles: Relating the morphological descriptors of the third body particles with the rheological parameters of the contact”, INSA Lyon Phd Thesis, University of Lyon.
Quacquarelli, A. (2021). “A multi-scale modeling approach for diamond tools wear”, INSA Lyon Phd Thesis, University of Lyon.
Casas, N. (2022). "Insights on the behavior of fault gouges during seismic sliding: a numerical investigation from granular rheology to friction laws", INSA Lyon Phd Thesis, University of Lyon.
Bouillanne, N. (2022). "Modélisation, caractérisation et conséquences des régimes d’écoulement de troisième corps : application au fretting dans la perspective d’une approche multi-échelle prédictive", INSA Lyon Phd Thesis, University of Lyon.
Bouchot, A. (2023). "Identification quantitative de caractéristiques physiques des interfaces solides en lien avec les propriétés tribologiques", INSA Lyon Phd Thesis, University of Lyon.
Daigne, K. (2023). INSA Lyon Phd Thesis, University of Lyon.
Ouchene, A. (2023). Phd Thesis, University of Lyon.
43. Mollon, G., Aubry, J., and Schubnel, A. (2023). “Laboratory Earthquakes Simulations – Typical Events, Fault Damage, and Gouge Production”, Journal of Geophysical Research: Solid Earth, 128, e2022JB025429
42. Casas, N., Mollon, G., and Daouadji, A. (2023). “Influence of Grain-Scale Properties on Localization Patterns and Slip Weakening within Dense Granular Fault Gouges”, Journal of Geophysical Research: Solid Earth, 128, e2022JB025666
37. Casas, N., Mollon, G., and Daouadji, A. (2022). “DEM analyses of cemented granular fault gouges at the onset of seismic sliding: peak strength, development of shear zones and kinematics”, Pure and Applied Geophysics, 179, 679-707
36. Mollon, G. (2022). “The Soft Discrete Element Method”, Granular Matter, 24-11
28. Zhang, Y., Mollon, G., and Descartes, S. (2020). "Significance of third body rheology in friction at a dry sliding interface observed by a multibody meshfree model: Influence of cohesion between particles", Tribology International, 145, 106188
27. Mollon, G. (2019). "Solid Flow Regimes Within Dry Sliding Contacts", Tribology Letters, 67:120
26. Mollon, G. (2018). "Mixtures of hard and soft grains: micromechanical behavior at large strains", Granular Matter, 20, 39
25. Mollon, G. (2018). "A unified numerical framework for rigid and compliant granular materials", Computational Particle Mechanics, 5, 517-527
23. Mollon, G. (2016). "A multibody meshfree strategy for the simulation of highly deformable granular materials", International Journal for Numerical Methods in Engineering, 108(12), 1477-1497
19. Mollon, G. (2015). "A numerical framework for discrete modelling of friction and wear using Voronoi polyhedrons", Tribology International, 90, 343-355, DOI: 10.1016/j.triboint.2015.04.011
17. Daudon, G., Villard, P., Richefeu, V., and Mollon, G. (2015). "Influence of the morphology of slope and blocks on the energy dissipations in a rock avalanche", Comptes Rendus de l'Académie des Sciences, 343(2), 166-177, DOI: 10.1016/j.crme.2014.11.003
16. Mollon, G., and Zhao, J. (2014). "3D generation of realistic granular samples based on random fields theory and Fourier Shape Descriptors", Computer Methods in Applied Mechanics and Engineering, 279 (2014), 46-65, DOI: 10.1016/j.cma.2014.06.022
15. Mollon, G., Dias, D., and Soubra, A.-H. (2013). "Range of the safe retaining pressures of a pressurized tunnel face by a probabilistic approach", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 139(11), 1954-1967, DOI: 10.1061/(ASCE)GT.1943-5606.0000911
14. Mollon, G., and Zhao, J. (2013). "Characterization of fluctuations in granular hopper flow", Granular Matter, 15(6), 827-840, DOI: 10.1007/s10035-013-0445-5
13. Senent, S., Mollon, G., and Jimenez, R. (2013). "Tunnel face stability in heavily fractured rock masses that follow the Hoek-Brown failure criterion", International Journal of Rock Mechanics and Mining Sciences, 2013, 60, 440-451, DOI: 10.1016/j.ijrmms.2013.01.004
12. Mollon, G., and Zhao, J. (2013). "Generating realistic 3D sand particles using Fourier descriptors", Granular Matter, 2013, 15(1), 95-108, DOI: 10.1007/s10035-012-0380-x
9. Mollon, G., Richefeu, V., Villard, P., and Daudon, D. (2012). "Numerical simulation of rock avalanches: Influence of a local dissipative contact model on the collective behavior of granular flows", Journal of Geophysical Research, Solid Earth, AGU, Vol. 117, F02036, DOI: 10.1029/2011JF002202
8. Mollon, G., and Zhao, J. (2012). "Fourier-Voronoi-based generation of realistic samples for discrete modelling of granular materials", Granular Matter, 2012, 14:621-638, DOI: 10.1007/s10035-012-0356-x
7. Mollon, G., Dias, D., and Soubra, A.-H. (2013). "Continuous velocity fields for collapse and blow-out of a pressurized tunnel face in purely cohesive soil", International Journal for Numerical and Analytical Methods in Geomechanics, 37(13), 2061-2083, DOI: 10.1002/nag.2121
6. Mollon, G., Dias, D., and Soubra, A.-H. (2011). "Probabilistic analysis of pressurized tunnels against face stability using collocation-based stochastic response surface method", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 137(4), 385-397, DOI: 10.1061/(ASCE)GT.1943-5606.0000443
5. Mollon, G., Dias, D., and Soubra, A.-H. (2011). "Rotational failure mechanisms for the face stability analysis of tunnels driven by a pressurized shield", International Journal for Numerical and Analytical Methods in Geomechanics, 35 (12), 1363-1388, DOI: 10.1002/nag962
4. Mollon, G., Phoon, K.-K., Dias, D., and Soubra, A.-H. (2010). "Validation of a new 2D failure mechanism for the stability analysis of a pressurized tunnel face in a spatially varying sand", Journal of Engineering Mechanics, ASCE, (137)1,1-14, DOI: 10.1061/(ASCE)EM.1943-7889.0000196
3. Mollon, G., Dias, D., and Soubra, A.-H. (2010). “Face stability analysis of circular tunnels driven by a pressurized shield”, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, (136)1, 215-229, DOI: 10.1061/(ASCE)GT.1943-5606.0000194
2. Mollon, G., Dias, D., and Soubra, A.-H. (2009). “Probabilistic analysis and design of circular tunnels against face stability”, International Journal of Geomechanics, ASCE, 9(6), 237-249, DOI: 10.1061/(ASCE)1532-3641(2009)9:6(237)
1. Mollon, G., Dias, D., and Soubra, A.-H. (2009). “Probabilistic analysis of circular tunnels in homogeneous soils using response surface methodology”, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 135(9), 1314-1325, DOI: 10.1061/(ASCE)GT.1943-5606.0000060
80. Casas, N., Mollon, G., and Daouadji, A. (2022). Link Between Localization Patterns, Frictional Behaviors, and Breakdown Energy within Dense Fault Goues for Difference Grain-Scale Properties, AGU Fall Meeting 2022, December 2022
79. Mollon, G., Aubry, J., and Schubnel, J. (2022). Spontaneous Emergence of Fault Heterogeneity Revealed by a Discrete-Continuum Model of Laboratory Earthquakes, AGU Fall Meeting 2022, December 2022
74. Casas, N., Mollon, G., and Daouadji, A. (2022). « Time and space evolution of R-bands in a dense granular material, relation to the evolution of the entire gouge », ECCOMAS Congress 2022, 5-9 June 2022, Oslo, Norway
72. Mollon, G. (2022). « A multibody meshfree approach for the simulation of gouge melting in seismic faults », ECCOMAS Congress 2022, 5-9 June 2022, Oslo, Norway
66. Mollon, G. (2022). “Recent advances in the simulations of soft granular media”, 18th European Mechanics of Materials Conference (EMMC18), April 4-6, 2022, Oxford, UK
65. Mollon, G. (2021). “The Soft Discrete Element Method, an extension of DEM to soft grains”, Particles 2021, Hamburg, 4-6 October 2021
64. Mollon, G., Aubry, J., and Schubnel, A. (2021)., “Reproducing laboratory earthquakes with a discrete-continuum model”, Powders and Grains 2021, July 5, 13, 21, 29 and August 5, 2021, held online
59. Casas, N., Mollon, G., and Daouadji, A. (2021)., “Rheology and kinematics of dense granular fault gouge with DEM: shear bands formation and evolution”, AGU General Assembly, 26-30 April 2021, Vienna, Austria, held online
58. Mollon, G., Aubry, J., and Schubnel, A. (2021)., “A micromechanically calibrated model reproducing earthquake cycle in the lab”, AGU General Assembly, 26-30 April 2021, Vienna, Austria, held online
55. Mollon, G. (2021). “Agglomeration in cohesive flows of soft particles“, 14th World Congress in Computational Mechanics (WCCM), ECCOMAS, 19-24 July 2020, Paris, France, held online
50. Casas, N., Mollon, G., and Daouadji, A. (2020). “A small-scale numerical study of fault slip mechanisms using DEM”, European Geophysical Union General Assembly, 4-8 May 2020, Vienna, Austria
48. Zhang, Y., Mollon, G., and Descartes, S. (2019). “Significance of third body rheology on friction during dry sliding wear: Multibody meshfree modelling”, 46th Leeds-Lyon Syposium on Tribology, 3rd of September 2019, Lyon, France
43. Mollon, G. (2019). “Regimes d’écoulements solides dans un contact sec“, Journées Internationales Francophones de Tribologie 2019, 25th of April 2019, Tours, France
39. Zhang, Y., Mollon, G., and Descartes, S. (2018). “Consequences of surface texturing on third body flows during fretting tests”, Materials Science and Engineering conference, 27th of September 2018, Darmstadt, Germany
38. Mollon, G. (2018). “Solid flow regimes within sliding interfaces: some insights from numerical tribology”, AGU Fall Meeting, 12th of December 2018, Washington DC, USA
37. Mollon, G. (2018). “A numerical insight into third body flow regimes within dry contacts”, Multiscale Modelling of Materials, 29th of October 2018, Osaka, Japan
34. Mollon, G. (2017). “Fault gauge numerical simulation: Dynamic rupture propagation and local energy partitioning”, AGU Fall Meeting, 13th of December 2017, New Orleans, USA
33. Jaza, R., Mollon, G., Descartes, S., and Berthier, Y. (2018). “Mechanical behaviours of a texture contact: from the morphological description of the third body to the rheological parameters”, 45th Leeds-Lyon Symposium on Tribology, 5th of September 2018, Leeds, UK
32. Mollon, G. (2017). “Simulation of compliant third bodies with a multibody meshfree approach”, 6th World Tribology Congress, 17th of September 2017, Beijing, China
31. Mollon, G. (2017). “A multibody strategy for deformable grains”, Powders and Grains 2017, 3-7 July 2017, Montpellier, France, EPJ Web of Conferences, 140, 15010 (2017)
30. Mollon, G., and Zhao, J. (2017). “Granular flow fluctuations in a conical hopper”, Powders and Grains 2017, 3-7 July 2017, Montpellier, France, EPJ Web of Conferences, 140, 03030 (2017)
26. Mollon, G. (2016). “Simulation of dry friction and wear at mesoscale usinga multibody meshfree approach”, Multiscale Modelling of Materials (AIP), 16th of October 2016, Dijon, France
23. Mollon, G. (2016). "A multibody meshfree method for third-body simulation", Annual meeting of the Society of Tribology and Lubrication Engineers (STLE 2016), 15-19 May 2016, Las Vegas, USA
22. Tsala-Moto, S., Mollon, G., and Berthier, Y. (2016). "Experimental study of the wear process at the rod-seal interface in a reciprocating sealing system", Annual meeting of the Society of Tribology and Lubrication Engineers (STLE 2016), 15-19 May 2016, Las Vegas, USA
21. Mollon, G. (2015). "Discrete modelling of friction and wear using Voronoi polyhedrons", International Conference of Tribology (ITC2015), Tokyo, Japan, 17th-20th of September 2015.
20. Tsala, S., Berthier, Y., Mollon, G., and Bertinotti, A. (2015). "Numerical study of the rod seal contact in an elastomeric sealing system: the contact pressure approach", International Conference of Tribology (ITC2015), Tokyo, Japan, 17th-20th of September 2015.
17. Tsala, S, Berthier, Y., and Mollon, G. (2015). "Conception d'un essai de frottement avec un matériau élastomère", Journées Internationales Francophones de Tribologie (JIFT2015), Nantes, France, 27th-29th of May 2015.
15. Mollon, G., and Zhao, J. (2014). "Building realistic samples for accurate discrete modelling of granular materials", World Conference of Computational Mechanics (WCCM 2014), Barcelona, Spain, 20-25 juillet 2014.
14. Liu, Z., Zhao, J., and Mollon, G. (2014). ”The influence of particle shape for granular media: a Fourier-shape-descriptor-based micromechanical study”, IS-Cambridge 2014: the Second International Symposium on Geomechanics from Micro to Macro, 1-3 September 2014, University of Cambridge, Cambridge, UK
13. Liu, Z., Zhao, J., and Mollon, G. (2013). ”The role of irregular shape on rolling andsliding behavior of particles in granular assembly”, 26th KKHTCNN Symposium on Civil Engineering, 18-20 November 2013, Singapore
10. Mollon, G., and Zhao, J. (2013). ”The influence of particle shape on granular hopper flow”, Powders and Grains 2013, 8-12 July 2013, Sydney, in press
9. Mollon, G., and Zhao, J. (2012). ”Realistic generation and packing of DEM sand samples”, ICGE 2012, 26-29 August 2012, Seoul, in press
6. Mollon, G., Dias, D., and Soubra, A.-H. (2011). ”Extension of CSRSM for the parametric study of the face stability of a pressurized tunnel” , Risk Assessment and Management in Geoengineering (Georisk 2011), Atlanta, USA, 26-28 juin 2011
5. Mollon, G., Phoon, K.-K., Dias, D., and Soubra, A.-H. (2011). “Influence of the scale of fluctuation of the friction angle on the face stability of a pressurized tunnel in sands”, Risk Assessment and Management in Geoengineering (Georisk 2011), Atlanta, USA, 26-28 juin 2011
3. Mollon, G., Dias, D., and Soubra, A.-H. (2009). "Reliability-based approach for the stability analysis of shallow circular tunnels driven by a pressurized shield", EURO:TUN09, Bochum, Germany, 9-11 September 2009
2. Mollon, G., Dias, D., and Soubra, A.-H. (2009). "Two new limit analysis mechanisms for the computation of the collapse pressures of circular tunnels driven by a pressurized shield", EURO:TUN09, Bochum, Germany, 9-11 September 2009
13. Mollon, G. (2021). “Modélisation locale des troisièmes corps pour la tribologie et la mécanique des failles", Journées de la Matière Condensée 2021, 27 August 2021, held online
12. Mollon, G. (2021). “Avancées récentes dans la simulation numérique des grains mous", Journées de la Matière Condensée 2021, 27 August 2021, held online
10. Kounoudji, K.A., Mollon, G., Renouf, M., Berthier, Y. (2015). "Analyse tribologique des assemblages boulonnés sous sollicitations vibratoires : cas des vannes de prélèvement d'air des aéronefs", Congrès Français de Mécanique (CFM2015), Lyon, France, 24th-28th of August 2015.
5. Mollon, G., Dias, D., et Soubra, A.-H. (2010). "Analyse de la stabilité d’un tunnel par un nouveau mécanisme 3D d’effondrement du front de taille", Journées Nationales de Géotechnique et de Géologie pour l’ingénieur (JNGG 2010), Grenoble, France, 7-9 juillet 2010
4. Mollon, G. (2010). "Analyse de la stabilité d’un front de taille pressurisé par deux nouveaux mécanismes rotationnels d’effondrement", Rencontres Universitaires de Génie Civil 2010 (AUGC 2010), La Bourboule, France, 2-4 juin 2010
3. Mollon, G., Dias, D., et Soubra, A.-H. (2010). "Application de la méthode de surface de réponse stochastique à l’analyse de stabilité d’un tunnel pressurisé", Rencontres Universitaires de Génie Civil 2010 (AUGC 2010), La Bourboule, France, 2-4 juin 2010
2. Mollon, G., Dias, D., et Soubra, A.-H. (2010). "Contribution à la méthode de la surface de réponse stochastique - Application à l’analyse de stabilité d’un tunnel", Journées de Fiabilité des Matériaux et Structures (JFMS 2010) ,Toulouse, France, 24-26 mars 2010
1. Mollon, G., Dias, D., et Soubra, A.-H. (2008). "Analyse tridimensionnelle de la stabilité du front de taille d'un tunnel circulaire par une approche fiabiliste", Journées Nationales de Géotechnique et de Géologie pour l'ingénieur (JNGG 2008), Nantes, France, 18-20 juin 2008